Choose the right screw for the job

Adjust-Tite®     

• Ideal for adjusting carcass and door jambs
• Removable
• Adjustable to 15mm
• Hardened – will not snap
• Suitable for all timbers & fibre boards
• Free driver bit in each box

Clad-Tite®    

• Ideal for all types of cladding
• Removable
• No surface damage when inserted
• Semi-concealed head
• Stainless steel – corrosion free
• Superior pull-out resistance than a nail
• Fits most gas powered guns
• TDCA accredited

Deck-Tite®      

• Ideal for all pressure treated timber - decking/fencing/sheds
• Minimum timber damage on insertion
• Net-Coat® treated for high corrosion protection
• Will not unscrew over time
• Clamps the boards fast
• Awarded the TDA’s DeckMark® accreditation

Deck-Tite® Composite Plus    

• Ideal for all composite board
• Stainless steel for corrosion resistance
• Clamps the jointed boards fast
• Draws swarf into the hole preventing blistering
• Eliminates ‘jacking’ apart of jointed boards

 Deck-Tite® Plus      

• Ideal for hardwood decking, marine and polluted environments
• A4 Stainless Steel for superior corrosion protection
• Square drive minimising recess damage
• Free driver bit in each box
• Clamps the boards fast
• Awarded the TDA’s DeckMark® accreditation

Floor-Tite®      

• Ideal for all flooring – softwood/fibreboard/hardwood
• will not work loose - eliminates squeaky boards
• Removable unlike nails
• Flush neat fix without damaging board
• No pilot hole necessary

Hinge-Tite®      

• Ideal for High quality hinges in both Chrome and Brass
• Fits flush in hinge allowing exact fit
• Fully threaded for secure fix
• Hardened so allows power driving
• Will not snap on insertion unlike standard brass/chrome screws
• Tri-Lock so balanced straight insertion – perfect flush fit in hinge

Lost-Tite®    

• Ideal for applications where a hidden fix is needed
• Lost head for fixing tongue & groove applications
• Hardened - will not snap on insertion
• Free driver bit in the box
• Removable unlike nails, pins and glue

MDF-Tite®      

• Ideal for MDF/All Fibre Boards/Chipboard
• Clamps the boards fast
• Will not pull apart under load
• Does not blister the board on insertion
• Matches most common board sizes

Screw-Tite®  

• Screw-Tite® WORKS IN ALMOST ANYTHING
• Ideal for all timbers and boards
• Hard & Softwood/Masonry (pilot hole required)/sheet steel/plastic & more
• Powered by Its prize winning Tri-Lock™ shank means:
• Less timber damage on insertion
• Close to edge driving
• Once in stays in
• Outperforms all in almost all applications
• The screw of choice for the British Woodworking Magazine

Timber-Tite®      

• Heavy duty screw ideal for landscaping and decking
• Countersunk head allows facia board fixing and minimal timber damage
• No pilot hole needed in most applications
• Free Driver bit in box
• The strength of a high tensile bolt
• Awarded the TDA’s DeckMark® accreditation

Tongue-Tite®    

• The ideal easy fix for tongue & groove flooring
• Removable
• Hidden
• No pilot hole necessary
• No messy glues or inferior nails
• No squeaky boards
• Free driver bit in each box

Tongue-Tite® Plus    

• Ideal for exterior use such as cladding, tongue & groove boards
• Stainless steel for excellent corrosion resistance
• Hidden
• Removable
• Free driver bit in each box

Tite®-Recess

• Ideal for awkward applications and where driving efficiency is crucial
• Accepts standard Pozi® driver bit perfectly
• Stick fit generates highly efficient drive
• Eliminates start wobble
• The most efficient Pozi® based recess available  

Net-Coat™:

• Ideal for external use
• Pressure treated timber
• ACQ
• Tanalith E
• Modified Timber
• Untreated timber

PLEASE NOTE: when driving in screws with a drill-driver always use the driver setting on slow speed.  Driving screws in with excessive speed WILL damage the screw, or possibly break it.